Polyethylene Buoys

Inicio   >  en   >  marine buoys   >  polyethylene buoys   > 

MODELS AND TYPES OF Polyethylene Buoys:

RBM 12 Polyethylene Buoy

This buoy has been especially designed to be used during work periods, danger marking, emergency buoys or in shallow waters.

Float made from high-quality rotomoulded virgin polyethylene, divided into two sections. Polyethylene includes the necessary pigment that provides the colour. UV filters guarantee a stable colour protection during its whole service life. It incorporates reinforcements from the waterline to the mooring eye. To ensure its buoyancy, the float is filled with closed-cell expanded polyurethane foam.

Metallic buoy parts (superstructure and tail) are made from hot-dip galvanized steel, providing a long service life under harsh marine conditions. They can be customized under client’s request, as well as to be made from stainless steel or marine aluminium.

Download PDF

Download Folder

PRODUCT CHARACTERISTICS

  • Float made from high-quality rotomoulded virgin polyethylene.
  • Float filled with closed-cell expanded polyurethane foam inside.
  • Metallic parts from hot-dip galvanized steel.
  • Colour impregnated in the polyethylene.
  • Chromaticity according to IALA Recommendations.
  • UV protection.
  • Compatible with a large variety of self-contained lanterns.
  • Top mark to increase buoy conspicuity at daytime.
  • Passive radar reflector of 8 m² RCS.
  • Stainless steel hardware.
  • Minimum maintenance.
  • Designed according to IALA Recommendations.

RBM 15/30 Polyethylene Buoy

RBM polyethylene buoys are designed for both sheltered and opensea waters, since they are available in diameters from 1.5 to 3 metres.

The float is made from high-quality rotomoulded virgin polyethylene.

Depending on the diameter and volume, floats can be made up of several sections. Polyethylene includes the necessary pigment that provides the colour. UV filters guarantee a stable colour protection during its whole service life. Reinforcements are included from the floating line to the mooring eye. To ensure its buoyancy, the float is filled with closed-cell expanded polyurethane foam.

Metallic buoy parts (superstructure and tail) made from hot-dip galvanized steel, and designed to provide a long service life under the harshest marine conditions. They can be customized under client’s request.

Download PDF

PRODUCT CHARACTERISTICS

  • Float made from high-quality rotomoulded virgin polyethylene, colour impregnated. Lateral reinforcements included in order to increase buoy resistance.
  • 15mm standard thickness. Other thicknesses available under request.
  • Float filled with closed-cell expanded polyurethane foam inside.
  • Chromaticity according to IALA Recommendations.
  • Detachable ballast weights to be installed in different depths and different chain sizes.
  • Metallic parts (superstructure and tail) from hot-dip galvanized steel as standard, stainless steel or marine aluminium as an option.
  • Capacity to hold up to 130 Ah batteries and 4 nos. solar modules up to 75W.
  • Compatible with a large variety of self-contained and marine LED lanterns.
  • Passive radar reflector of 10 m² RCS.
  • Designed according to IALA Recommendations.

RBM-HV 22/30 Polyethylene Buoy

RBM-HV 22/30 buoys are characterised by their high-visibility superstructure. They are indicated to be deployed in places where their day mark has to be recognised from a long distance, such as landfall buoys.

The float is made from high-quality rotomoulded virgin polyethylene. Depending on float diameter and volume, floats are made up of several sections. Polyethylene includes the necessary pigment that provides the colour. UV filters guarantee a stable colour protection during its whole service life. To ensure its buoyancy, the float is filled with closed-cell expanded polyurethane foam.

The high-visibility superstructure is made from marine aluminium, providing a long service life in the harshest marine conditions. They can be customized under client’s request.

Download PDF

PRODUCT CHARACTERISTICS

  • Float divided into 2 or 4 sections, made from rotomoulded virgin polyethylene, 15mm thickness. Lateral reinforcements included
  • in order to increase buoy resistance.
  • Float filled with closed-cell expanded polyurethane foam inside, in order to avoid water absorption.
  • Detachable ballast weights to be installed in different depths and different chain sizes.
  • Marine-aluminium superstructure with capacity to hold up to 200 Ah batteries and up to 6 nos. solar modules of 75W.
  • Colour impregnated in the polyethylene. Chromaticity according to IALA recommendations.
  • Wide top platform for maintenance works.
  • Compatible with a large variety of self-contained and marine LED lanterns.
  • Passive radar reflector of 10 m² RCS.
  • Minimum maintenance.
  • Designed according to IALA Recommendations.

RBM-ATV 25 Polyethylene Buoy

The RBM-ATV 25 has been especially designed to avoid vandalism. It is particularly indicated to be deployed in places with a high theft incidence. Thanks to its construction, it can be deployed in both sheltered and open-sea waters.

Float is made up of 4 nos. rotomoulded virgin polyethylene sections. Its conic shape makes impossible that anyone can board it. Polyethylene includes the necessary pigment that provides the colour.

Its superstructure is a galvanized-steel tube without toehold avoiding the access to the upper part and to the marine lantern. It incorporates a self-contained lantern inside the superstructure, making impossible its handling.

Designed according to IALA Recommendations.

Download PDF

PRODUCT CHARACTERISTICS

  • Float made from high-quality rotomoulded virgin polyethylene, colour impregnated, 15mm thickness. Lateral reinforcements included in order to increase buoy resistance.
  • UV filters guarantee a stable colour protection during its whole service life.
  • Float filled with closed-cell expanded polyurethane foam inside, in order to avoid water absorption.
  • Chromaticity according to IALA Recommendations.
  • Detachable ballast weights to be installed in different depths and different chain sizes.
  • Metallic parts (superstructure and tail) from hot-dip galvanized steel as standard, stainless steel or marine aluminium as an option.
  • Conic design of float top to avoid boarding.
  • Stainless-steel hardware with anti-vandal system (special keys for handling).
  • Upper part fitted with integrated lantern, top mark and numbering, and with restricted access.
  • Minimum maintenance.

PBM 08 Polyethylene Buoy

These buoys have been especially designed to be used during work periods, danger marking, emergency buoys or in shallow waters. They are manufactured from high-quality rotomoulded virgin polyethylene in one piece. Polyethylene includes the necessary pigment that provides the colour.

UV filters guarantee a stable colour protection during its whole service life. Reinforcements are included from the floating line to the mooring eye.

They are supplied with their corresponding ballast weight and filled with closed-cell expanded polyurethane foam.

Download PDF

PRODUCT CHARACTERISTICS

  • High-shock resistant rotomoulded polyethylene float, 10mm thickness.
  • Float filled with closed-cell expanded polyurethane foam inside.
  • Ballast weight integrated for a greater stability.
  • Metallic parts from marine aluminium.
  • Colour impregnated in the polyethylene.
  • Chromaticity according to IALA Recommendations.
  • UV protection.
  • Compatible with a large variety of self-contained lanterns.
  • Day marks as an option, to increase buoy conspicuity at daytime.
  • Internal passive radar reflector of 2 m² RCS, as an option.
  • Minimum maintenance.
  • Designed according to IALA Recommendations.

PBM 15/25 Polyethylene Buoy

Our range of PBM 15/25 polyethylene buoys is designed for both sheltered and open-sea waters, since they are available in diameters from 1.5 to 2.5 metres. These buoys are characterised by their minimum maintenance.

Made from high-quality rotomoulded virgin polyethylene, filled with closed-cell expanded polyurethane foam. Polyethylene includes the necessary pigment that provides the colour. UV filters guarantee a stable colour protection during their whole service life.

Reinforcements are included from the floating line to the mooring eye. They are supplied with their corresponding ballast weights. Depending on their size, they are manufactured of several sections.

Manufactured with high-quality and resistant materials, these buoys provide a long service life under harsh marine conditions.

Download PDF

PRODUCT CHARACTERISTICS

  • Float manufactured with rotomoulded virgin polyethylene, 15mm thickness. Other thicknesses available under request.
  • High shock resistance.
  • Float filled with closed-cell expanded polyurethane foam inside, in order to avoid water absorption.
  • Possibility of ballast weight integrated for a greater stability.
  • Metallic parts from marine aluminium.
  • Colour impregnated in the polyethylene.
  • Chromaticity according to IALA Recommendations.
  • UV protection.
  • Compatible with a large variety of self-contained and marine LED lanterns.
  • Top mark to increase buoy conspicuity at daytime.
  • Minimum maintenance.
  • Designed according to IALA Recommendations.

PBM 25 Polyethylene Buoy

The polyethylene buoys of the PBM 25 series are designed for both calm waters and offshore. They are characterized by minimal maintenance. Manufactured in high quality virgin rotomolded polyethylene, filled with closed cell polystyrene.

The polyethylene incorporates the necessary pigmentation that provides the color. It has UV filters that guarantee stable color protection throughout the service life. Incorporates reinforcements from the waterline to the mooring.

They are supplied with their corresponding counterweights. Depending on the diameter and volume, the floats are formed by several sections. Built with resistant and high quality materials, these buoys provide a long service life in extreme marine conditions.

PRODUCT CHARACTERISTICS

  • Float made of virgin rotomolded polyethylene, 13 mm thick. Modular in 4 replaceable pieces joined by a stainless steel cross frame.
  • High impact resistance
  • Float filled with closed cell polystyrene, which prevents the absorption of water, pigmented in color withUV protection and repellent to marine incrustations.
  • Removable counterweights for greater stability.
  • Metal parts in stainless steel.
  • It supports maximum wind of 50 knots and marine currents of up to 6 knots.
  • Chromaticity according to the IALA Recommendations.
  • Compatible with a variety of autonomous and marine LED flashlights.
  • Top and day marks to increase the visibility of the buoy during the day.
  • Minimum maintenance
  • Designed in accordance with the IALA Recommendations.
certificados